Radial Drilling Machine


              
           
SPECIFICATION 
MODEL FRD-750S FRD-900S FRD-1100S
Drill capacity (steel) 38mm 38mm 50mm
Tapping capacity (steel) 19mm 19mm 25mm
Spindle taper MT No. 4 MT No. 4 MT No. 4
Column to spindle center 775mm 920mm 1145mm
Spindle stroke 200mm 200mm 250mm
Spindle speed 88~1500rpm  (6) 88~1500rpm (6) 44~1500rpm (12)
Spindle Feed (mm/per rev.) 0.05, 0.09, 0.15mm/rev. 0.05, 0.09, 0.15mm/rev. 0.05, 0.09, 0.15mm/rev.
Horizontal travel of headstock 485mm 630mm 815mm
Spindle drive motor 2HP 2HP 3HP
Work table 550x405x315mm 550x405x315mm 650x500x410mm
Column diameter 210mm 210mm 300mm
Dimension of Base 1280x640x150mm 1435x640x150mm 1800x800x170mm
Machine weight 1100 Kgs 1170 Kgs 2000 Kgs
Packing dimension 1422x813x2057mm 1575x813x2057mm 2007x990x2235mm

Radial Drilling Machine  ( Hydraulic) 
SPECIFICATION 
MODEL FRD-1280H FRD-1600H
Drill capacity (steel) 50mm(2") 55mm (2.2")
Tapping capacity (steel) 25mm(1") 50mm(2")
Spindle taper MT4 (MT5 Opt.) MT5
Column to spindle center 1245mm 1700mm
Spindle stroke 250mm 300mm
Spindle speed 44~1500rpm (12) 20~1500rpm (Variable)
Spindle power down feed 0.05/0.09/0.15mm per rev. 1~500 mm/min
DC motor
Horizontal travel of headstock 915mm 1310mm
Spindle drive motor 3HP 5HP
Work table 650x500x410nn 800x540x400 mm
Column diameter 300mm 336mm
Inverter Nil 7.5HP
Dimension of base 1800x800x170mm 2370x940x220mm
Machine weight 2050 Kgs 3150 Kgs
Packing dimension 2286x990x2235mm 2850x1210x2540mm

Radial Drilling Machine  ( Hydraulic) 


FRD-1300H


FRD-1700H
¡@
SPECIFICATION 
MODEL ¡@ FRD-1300H FRD-1700H
Capacity Drilling Steel ¡@ 55mm 55mm
Cast iron ¡@ 65mm 66mm
Tapping Steel ¡@ M50 M50
Cast iron ¡@ M60 M60
Boring Steel ¡@ 100mm 126mm
Cast iron ¡@ 175mm 186mm
Spindle stroke H 250mm 250mm
Size of Morse Taper ¡@ M.T. #5 M.T. #5
Spindle speed ¡@ 12 speed
44~1500 rpm (60hz)
36~1250 rpm (50hz)		 12 speed
30~1500 rpm (60hz)
25~1300 rpm (50hz)
Spindle feeds ¡@ 6 speed
0.05~0.306mm/rev		 6 speed
0.05~0.306mm/rev
Column Diameter A 300mm 336mm
max.distance-column surface spindle center B 1250mm 1700mm
Min. distance-column surface spindle center C 330mm 400mm
Horizontal travel of headstock D 915mm 1310mm
Max. distance, base to spinle E 1230mm 1420mm
Min distance, base to spindle F 540mm 260mm
Overall height of column G 2160mm 2410mm
Machine height from floor I 2585mm 3150mm
Dimensions of base (LxMxK) ¡@ 1800x800x170mm 2370x940x220mm
Effective area of work table (RxSxT) ¡@ 650x500x410mm 800x540x400mm
Spindle drive motor (HP) ¡@ 5HP(4P/8P) 5HP
Arm elevation motor (HP) ¡@ 2hp 2hp
Coolant pump (HP) ¡@ 1/8hp 1/8hp
Oil motor (HP) ¡@ 1hp 1hp
Net weight-approx (kg) ¡@ 2150kgs 3150kgs
Gross weight-approx (kg) ¡@ 2250kgs 3250kgs
Measurement (LxWxH) ¡@ 2290x1100x2230mm 2850x1210x2540mm
¡@ ¡@ ¡@ ¡@
¡@ ¡@ ¡@ ¡@
¡@ ¡@ ¡@ ¡@